Nishatganj, Lucknow, Uttar Pradesh
GST No. 09AAFCS3014C1ZT
Call 08048980671 67% Response Rate
We are engaged in offering a wide range of ESE Lightning Conductor to our clients. These products are mainly used to provide information no of lightning strikes which our lightning protection system has safely discharged. The products that we offer to our clients are made using high grade raw material keeping in mind the needs and requirements of our clients. These products are manufactured using superior quality raw material as per the set international standards. The products that we offer in this category are Lightning Conductor, ESE Lightning Protection System and Lightning Counter. These products are in huge demand across the globe and are widely appreciated.
Our lightning protection system are suitable for all types of climatic conditions and high altitudes also. Designed and manufactured in accordance with NFC 17-102 standard.
SABO LIVA advanced active lightning conductors provide complete safety from direct lightning strike to structure within the radius of 39m to 150m. Tested for 115KA short circuit imuplse current from HV test lab, CE marked, temperature test of -40 to 120 degree Centrigrade, advanced trigerring time test upto 96 microseconds, serial numbered and carries 30 years free replacement warranty from all types of manufacturing defects.
Minimum Order Quantity: 5 Unit
Product Brochure
Discharge Current | 100kA |
Model Number/Name | SDLC6 |
Brand | SABO |
Display Type | Digital |
Application | Industrial |
Count Capacity | 999999 |
Color | White/Grey |
Type | Counter |
Shape | Rectangular |
Frequency | 50 HZ |
Material | Thermoplastic |
SDLC-6 Lightning Strike Counter Digital 6 digits IP65Product Manual1. IntroductionSDLC-6 water-proof lightning counter is an universal type lightning counter. When the lightning protection circuit system is normal, there is no lightning current in the discharge line, the lightning counter don''t count. When the lightning current is discharged to the ground, the lightning counter can induce it and counts correctly.SDLC-6 water-proof lightning strike counter is suitable for all SPD, lightning rod, etc. It can induce the discharge current and count, and then display the number of lightning strike in the screen. This Lightning Counter can count accurately. If power failure, the operational data won’t lose. It takes the advantages of dust-proof and water-proof, etc.
2. Technical Parameter Type Waterproof Lightning Strike Counter Minimum Counting Current(8/20μs) ≥500ACount Number 0-999999 times Down Conductor Maximum Diameter D≤25mmMeasure L*W*H 100×68×70mmWorking Humidity ≤95%Operating Temperature -40~+850C
3. Installation Instruction
1) SDLC-6 waterproof lightning counter can be installed at the ground wire of power SPD or the down conductor bare part of lightning rod. The installation diagram is as follow:
2) Loosen the two screw nuts in the back of lightning counter, spring washer and flat gasket, remove the clamp, to put the ground wire of power SPD and or the down conductor bareness part of lightning rod between the two screw nuts, and then put the pressing plate, flat gasket, spring washer, screw nuts, tighten the two screw nuts.
3) Pay attention to ground wire of power SPD or the down conductor of lightning rod, Installation and wiring diagram (bareness part of lightning rod and the mounting plate,pressing plate. The contact segment must be well connected to low down the contact resistance, to make sure the counting accuracy).
4. MaintenanceSDLC-6 waterproof lightning counter doesn’t need special maintenance. Annually, to check the ground wire of power SPD or the down conductor bareness part of lightning rod, to see whether the contact segment is well connected or not.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial |
Lighting Protection Material | STAINLESS STEEL |
Air Terminal Diameter | 160MM |
Color | Silver |
Power Source | Electric |
Country of Origin | Made in India |
We are engaged in offering a wide range of Piezoelectric Lightning Protection System to our clients. Offered range of rising mains is manufactured by making use of high grade raw material. These Class A Lightning protection system are in huge demand and are widely appreciated by our client across the globe.
Lightning Protection System consists of following
Piezoelectric based ESE Air Terminal SABO LIVA LAP PEX-220 in accordance with NFC 17-102 2011 standard
Shaft GI / FRP / SS for raising Air terminal minimum 3m above the top of the structure to be protected
Down conductor > 30*2mm copper strip
Lightning counter 6 digits IP65
Test clamp for disconnecting the down conductor and testing the earthing.
Earthing Maintenance free tripod type of copper bonded steel rod
Specifications of the lightning conductor LAP PEX-220
Very high grade Stainless steel material body, 1500mm long and 15.0 Kg nett weight with pointed tip
Based on Active Piezoelectric Early Streamer Emission principle
Early streamer warning time of 136 µsec
Protection radius upto of188m.
METU Electrical & Electronics test report as per NFC 17-102 2011 standard
In each lightning conductor Serial number, model no., CE mark, hologram & manufacturer name is available. Packed inside printed carton for each piece
Every lightning conductor carry 30 years warranty. Certificate is issued from the manufacturer.
Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if required
QA technic conformity certificate
TS EN ISO 90012008 certificate
BS EN ISO 140012004 certificate
Certificate of registration from World Intellectual Property Organization
CE certification
Designed as per NFC17-102 standard which meets all lightning conductor standards
Suitable for all types of lightning discharges
Suitable for all whether and climatic conditions and can be used in any terrain
For complete catalogue kindly check attachment.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial,telecom towers,buildings,monuments,solar,dam |
Features | Advanced Early Streamer Emission |
Arrester Type | ESE |
Brand | SABO LIVA |
Material | Stainless steel |
Class | A |
Color | Stainless steel |
Suitable For | Lightning protection for Multistoreyed buildings,individual houses,factories,shopping malls,tower |
Streamer Emission | 22 microseconds |
Warranty | 30 |
Model Number | LAP CX 040 |
Current | 100KA (10/350) |
Radius | 62 m |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Application | Industrial |
Display type | Digital |
Ip rating | IP65 |
Material | Steel |
Voltage | 220-240 V |
Frequency | 50 HZ |
We are a coveted organization engaged in offering our patrons with an impeccable array of Lightning Counter with SMS Facility. Offered array of lightning counter is manufactured in complete adherence with the industry laid standards and norms to gauge its error free nature and flawlessness. Moreover, patrons can avail a whole range of various sizes and dimensions from us.
Features:
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial |
Lighting Protection Material | Copper |
Counting Range | 0 to 999999 |
Discharge capacity | Above 1 Ka |
Degree of protection | IP65 |
Working temperature | -300C to +800C |
Using our vast industrial experience we bring forth a wide range of Lightning Counter with Email Facility for our clients. The products offered by us are available at the most affordable rates to our clients. These products are manufactured using high grade raw material under the strict supervision and guidance of our quality check experts. Offered products should be installed at approximately 1.5 m from the ground level.
Specifications:
• Counting Range: 0 to 999999
• Discharge capacity: Above 1 Ka
• Degree of protection: IP65
• Working temperature: -300C to +800C
• Should be installed preferably at approx 1.5meter / eye level from the ground.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial |
Material | Steel |
Color | Grey |
Phase Type | Three Phase |
Arrester Type | Distribution Type, Station Type, Intermediate Type |
Class Type | A |
Backed by a team of hardworking professionals, we have been able to bring forth an outstanding range of Class A Advanced ESE Lightning Conductor. Offered range of systems are fabricated at the most valued vendors end. Class A Lightning conductor / Arrester LAP-BX-175 provides protection radius of 109m from direct lightning strike from its installation.
Specifications:
Very high grade stainless steel material body, 1000 mm long and 4.8 Kg nett weight with pointed tip
Based on active early streamer emission principle and consists of ion generator
Early streamer warning time of ΔT60 µs
Protection radius at 4 m height in Level I, II and III area is 81 m, 100 m and 109 m respectively
METU electrical & electronics test report as per NFC 17-102 standard
In each lightning conductor serial number, Model no., CE mark, hologram & manufacturer name is available. packed inside printed carton for each piece
Every lightning conductor carry 30 years warranty. certificate is issued from the manufacturer
Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if required
Sigma test report
QA technical conformity certificate
TS EN ISO 9001:2008 certificate
BS EN ISO 14001:2004 certificate
Certificate of registration from World Intellectual Property Organization
CE certification
Testable by means of SABO LIVA external tester
Designed as per NFC17-102 standard which meets all lightning conductor standards
Suitable for all types of lightning discharges (negative, positive or lateral)
Suitable for all whether and climatic conditions and can be used in any terrain
No use of battery or power source is required
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial |
Lighting Protection Material | Copper-Clad Steel |
Color | Silver |
Size | 130 m radius |
Power Source | Electric |
Current | 115 KA |
We are instrumental in offering ESE Lightning Protection System to our valued clients. Offered range is designed and developed in accordance with the clients needs and demands. Our team of experienced quality controllers evaluate the entire range as per industry laid parameters to gauge their safe dispatch and error free nature at the patrons end.
Model No. SABO LIVA LAP AX-210
Some features are:
· Active ESE early streamer emission air terminal SABO LIVA LAP AX-210 in accordance with latest NFC 17-102 2011 standard.
· Shaft GI/FRP/SS for raising air terminal minimum 3 m above the top of the structure to be protected
· Down conductor ≥ 25*2 mm copper strip
· Lightning counter of 6 digits IP65
· Test Link for disconnecting the down conductor and testing the earthing
· Earthing should be maintenance free tripod type of copper bonded steel rod
Specifications:
· Very high grade stainless steel material body, 1000mm long and 5 Kg nett weight with pointed tip
· Based on active early streamer emission principle and consists of ion generator
· Early streamer warning time of 82 MICROSECONDS
· Protection radius at 4 m height in Level IV area is 130 m
· METU electrical & electronics test report as per NFC 17-102 standard
· In each lightning conductor serial number, model no., CE mark, hologram & manufacturer name is available. Packed inside printed carton for each piece
· Every lightning conductor carry 30 years warranty. Certificate is issued from the manufacturer
· Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if required
· Sigma test report
· CE certification
· Designed as per NFC17-102 standard which meets all lightning conductor standards
· Suitable for all types of lightning discharges (negative, positive or lateral)
· No use of battery or power source is required
· Tested for 115 KA short circuit in HV test lab, triggering time and temperature -40 to +125 degree centigrade.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial |
Brand | Saboliva |
Material | Stainless Steel |
Color | Silver |
Country of Origin | Made in India |
Radius | 107 m |
SABO LAP BX 175 lightning arrester is advanced ESE type and provides protection radius of 107m in Level IV.
Our ESE lightning arrester is testable from external tester for internal configuration as well as magnetic field test.
Carries 30 years warranty.
Tested as per NFC 17-102 standard for:
1. Short circuit test of 115KA
2. Advance triggering time of 63 microseconds.
3. Temperature withstand test of -40 to +120 degree Centigrade
4. Salt mist and humid sulphur test
5. CE marking
6. Internal test report available for each unique serial numbered rod provided with each lightning rod.
We provide Auto Cad / 3D Designing for Level of protection required for the building where lightning rod to be installed. Also, provide video for complete lightning protection system installation.
Additional Information:
View Complete details
Minimum Order Quantity: 01 Piece
Product Brochure
Brand | SABO |
Usage/Application | Buildings & Houses |
Arrester Type | ESE |
Material | Stainless Steel |
Color | Steel |
Dimension | 500 mm long and 5.7 Kg net weight |
advanced active ion genrating ese early streamer emission air terminal / lightning conductor lap-dx 250 specifications:
1. Stainless steel material body, 500mm long and 5. 7 kg nett weight with pointed tip.
2. Based on active early streamer emission principle and consists of ion generator.
3. High early streamer warning time of 96 µsec.
4. Provides protection radius of 146m in level iv area / 134m in level iii area/ 123m in level ii area/ 115m in level i area at 5m height as per latest nfc 17-102 2011 standard.
5. Lcoe test report for 100ka (10/350) short circuit withstand current as per nfc 17-102:2011
5. Metu electrical & electronics test report as per nfc 17-102 standard.
7. In each lightning conductor serial number, model no. , ce mark, hologram & oem name is printed.
8. Every lightning conductor carries 30 years warranty.
9. Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if
required.
10. Sigma test report
11. Suitable for all types of lightning discharges.
12. Suitable for all whether and climatic conditions and can be used in any terrain.
13. No use of battery or power source is required.
Additional Information:
View Complete details
Minimum Order Quantity: 01 Piece
Product Brochure
Usage/Application | Buildings & Houses |
Arrester Type | ESE |
Material | Stainless Steel |
Class | A |
Color | Steel |
Dimension | 1000mm long and 5 Kg |
Brand | SABO |
We are instrumental in offering ESE Lightning Protection System to our valued clients. Offered range is designed and developed in accordance with the clients needs and demands. Our team of experienced quality controllers evaluate the entire range as per industry laid parameters to gauge their safe dispatch and error free nature at the patrons end.
Some features are:
Active ESE early streamer emission air terminal SABO LIVA LAP AX-210 in accordance with latest NFC 17-102 2011 standard.
Shaft GI/FRP/SS for raising air terminal minimum 3 m above the top of the structure to be protected
Down conductor > 30*2 mm copper strip
Lightning counter of 6 digits IP65
Test clamp for disconnecting the down conductor and testing the earthing
Earthing should be maintenance free tripod type of copper bonded steel rod
Additional Information:
View Complete details
Minimum Order Quantity: 01 Piece
Product Brochure
Usage/Application | Buildings & Villas |
Arrester Type | ESE |
Brand | SABO |
Material | STAINLESS STEEL |
Color | Steel white |
Usage/Application | Buildings & Villas |
Arrester Type | ESE |
Brand | SABO |
Material | STAINLESS STEEL |
Color | Steel white |
Minimum Order Quantity | 01 Piece |
View Complete details
Minimum Order Quantity: 01 Piece
Product Brochure
Model Name/Number | DX250 |
Standards | NFC 17-102:2011 |
Brand | SABO-LIVA |
Country of Origin | Made in India |
A lightning arrester is a device used on electric power systems and telecommunication systems to protect the insulation and conductors of the system from the damaging effects of lightning. The typical lightning arrester has a high-voltage terminal and a ground terminal.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial |
Housing Type | Porcelain |
Phase Type | Three phase |
Power Source | Electric |
Arrester Type | Distribution Type, Station Type, Intermediate Type |
Radius | 188 m |
We are engaged in offering a wide range of Piezoelectric Lightning Protection System to our clients. These Class A Lightning protection system are in huge demand and are widely appreciated by our client across the globe. PEX-220 lightning arrester provides maximum protection radius from lightning strike of 188m, much more than any other ESE lightning conductor.
Lightning Protection System consists of following:
Piezoelectric based ESE Air Terminal SABO LIVA LAP PEX-220
Shaft GI / FRP / SS for raising Air terminal minimum 3m above the top of the structure to be protected
Down conductor >= 25*2mm copper strip
Lightning counter 6 digits IP65
Test clamp for disconnecting the down conductor and testing the earthing.
Earthing Maintenance free tripod type of copper bonded steel rod
Specifications of the lightning conductor LAP PEX-220:
Very high grade Stainless steel material body, 1500mm long and 15.0 Kg nett weight with pointed tip
Based on Active Piezoelectric Early Streamer Emission principle
Early streamer warning time of 136 usec
Protection radius upto of 188m.
METU Electrical & Electronics test report as per NFC 17-102 standard
In each lightning conductor Serial number, model no., CE mark, hologram & manufacturer name is available. Packed inside printed carton for each piece
Every lightning conductor carry 30 years warranty. Certificate is issued from the manufacturer.
Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if required
QA technic conformity certificate
TS EN ISO 9001:2008 certificate
BS EN ISO 14001:2004 certificate
Certificate of registration from World Intellectual Property Organization
CE certification
Designed as per NFC17-102 standard which meets all lightning conductor standard
Suitable for all types of lightning discharge
Suitable for all whether and climatic conditions and can be used in any terrain
For complete catalogue kindly check attachment.
Additional Information:
View Complete details
Minimum Order Quantity: 01 Piece
Product Brochure
Lighting Protection Material | Copper-Clad Steel |
Arrester Type | Conventional |
Usage/Application | Direct lightning strike |
Color | Copper |
Air Rod Height | 1000mm or as per requirement |
Brand | SABO |
Suitable For | Building lightning protection,tower,high mast |
Country of Origin | Made in India |
SABO Conventional Lightning Conductor is 5 spikes type, it provides safety from lightning strikes to residences, homes, offices, towers, high mast, villas, tall or isolated building, etc. SABO conventional lightning arrester is installed at the roof of the building or mast of a vessel which then protects your building from lightning. Conventional type lightning arrester are special grounding systems designed to safely conduct the extremely high voltage currents associated with lightning strikes.
Made of high grade steel and coated with electrolytic grade copper as per requirements of Indian and International standards. Meets IS 2309, IEC 62305 standards.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Arrester Length | 1m |
Color | Steel |
Model Number | LAP BX 175 |
Warranty | 30 years |
Standard | NFC 17-102 |
Place Of Origin | INDIA |
Brand | SABO |
Radius Protection | 107m |
advanced active ion genrating ese early streamer emission air terminal / lightning conductor lap-bx 125 specifications
1. Stainless steel material body, 700mm long and 4. 2 kg nett weight with pointed tip.
2. Based on active early streamer emission principle and consists of ion generator.
3. High early streamer warning time of 40 sec.
4. Provides protection radius of 83m in level iv area, 74m in level iii area/ 64m in level ii area/ 58m in level i at 4m height in accordance with nfc 17-102 2011 standard.
5. Metu electrical & electronics test report as per nfc 17-102 standard.
7. In each lightning conductor serial number, model no. , ce mark, hologram & oem name is printed.
8. Every lightning conductor carries 30 years warranty.
9. Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if
required.
10. Sigma test report
11. Temperature withstand test of -40c to +125c.
12. Qa technic conformity certificate
13. Ts en iso 90012008 certificate
14. Bs en iso 140012004 certificate
15. Certificate of registration from world intellectual property organisation
16. Ce certification
17. Testable by means of external tester.
18. Designed as per nfc17-102 standard.
17. Suitable for all types of lightning discharges.
19. Suitable for all whether and climatic conditions and can be used in any terrain.
20. No use of battery or power source is required.
elevation rod
the advance lightning conductor height may be increased by means of an elevation rod of gi/ ss/ frp with gi/ aluminium.
the lightning conductor tip should be at least 2 meters higher than the highest point of the building that it protects, including antenna, cooling towers, roofs, tanks, etc.
the down conductor is attached to the advance lightning conductor by a connecting system located on the support rod. This connecting system consists of suitable mechanical devices providing long-lasting contact. The down conductor should comply with the data as below
down conductor
material
remarks
minimum dimensions
bare/tin -plated electrolytic copper
recommended for its good conductivity and corrosion resistance
strip 30 x 2mm
round section 8mm dia
18/10-304 stainless steel
recommended in certain corrosive environments
strip 30 x 2mm
round section 8mm dia
a 5/l
to be used on aluminum surfaces (cladding, curtain walls)
strip 30 x 3mm
round section 10mm dia
when advance lightning conductors protect open areas such as playing fields, golf courses, swimming pools, camping sites, etc. , they should be installed on specific supports such as lightning poles, pylons or any other nearby structures which enables in advance lightning conductor to cover the maximum area to be protected.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | SABO LIVA |
Material | IRON |
Additional Information:
View Complete details
Minimum Order Quantity: 01 Piece
Product Brochure
Arrester Type | ESE (Early Streamer Emission) |
Air Terminal Diameter | 150mm |
Features | 107m protection radius from lightning strike |
Mast Height | 5m |
Color | Stainless Steel |
Air Rod Height | 1m long |
Suitable For | Lightning protection of Area,Shopping malls,commercial complex,high rise buildings,industries |
Streamer Emission | Yes |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Type | Type1 |
Brand | ABB |
ABB OR 60 Lightning conductor is used for protection of all structures or area from protection of lightning strike within radius of 107m in Level IV.
Applicable for Towers, Chimneys, Warehouses, Railways, ATC, Indutries, apartments, malls, houses, etc.
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Lighting Protection Material | Copper-Clad Steel, STAINLESS STEEL |
Color | Silver |
Size | 107m radius |
Brand | SABOLIVA |
Usage/Application | Industrial |
Country of Origin | Made in India |
Backed by a team of hardworking professionals, we have been able to bring forth an outstanding range of Stainless Steel Advanced ESE Lightning Conductor. Offered range of systems are fabricated at the most valued vendors end. This Lightning conductor / Arrester LAP-BX-175 provides protection radius of 110m from direct lightning strike from its installation.
Specifications:
• Very high grade stainless steel material body, 1000 mm long and 4.8 Kg nett weight with pointed tip
• Based on active early streamer emission principle and consists of ion generator
• Early streamer warning time of 63 microseconds
• Protection radius at 4 m height in Level I, II, III & IV area is 81 m, 89m, 100 m and 110 m respectively in accordance with latest amendments of NFC 17-102 2011 standard.
• METU electrical & electronics test report as per NFC 17-102 2011 standard
• In each lightning conductor serial number, Model no., CE mark, hologram & manufacturer name is available. packed inside printed carton for each piece
• Every lightning conductor carry 30 years warranty. certificate is issued from the manufacturer
• Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if required
• Sigma test report
• QA technical conformity certificate
• TS EN ISO 9001:2008 certificate
• BS EN ISO 14001:2004 certificate
• Certificate of registration from World Intellectual Property Organization
• CE certification
• Testable by means of SABO LIVA external tester
• Designed as per NFC17-102 standard which meets all lightning conductor standards
• Suitable for all types of lightning discharges (negative, positive or lateral)
• Suitable for all whether and climatic conditions and can be used in any terrain
• No use of battery or power source is required
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | SABO LIVA |
Color | Stainless Steel |
Usage/Application | Industrial |
Size | 72 m |
IP rating | IP 65 |
Weight | 2.4 Kg |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Lighting Protection Material | Copper |
Color | Silver |
Power Source | Electric |
Usage/Application | Industrial |
Radius | 146 mtrs |
Frequency | 50 Hz |
advanced active ion genrating ese early streamer emission air terminal / lightning conductor lap-dx 250 specifications:
1. Stainless steel material body, 500mm long and 5. 7 kg nett weight with pointed tip.
2. Based on active early streamer emission principle and consists of ion generator.
3. High early streamer warning time of 96 µsec.
4. Provides protection radius of 146m in level iv area / 134m in level iii area/ 123m in level ii area/ 115m in level i area at 5m height as per latest nfc 17-102 2011 standard.
5. Lcoe test report for 100ka (10/350) short circuit withstand current as per nfc 17-102:2011
5. Metu electrical & electronics test report as per nfc 17-102 standard.
7. In each lightning conductor serial number, model no. , ce mark, hologram & oem name is printed.
8. Every lightning conductor carries 30 years warranty.
9. Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if
required.
10. Sigma test report
11. Suitable for all types of lightning discharges.
12. Suitable for all whether and climatic conditions and can be used in any terrain.
13. No use of battery or power source is required.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Lighting Protection Material | Copper-Clad Steel |
Color | Silver |
Size | 131m radius |
Power Source | Electric |
Usage/Application | Industrial |
We are instrumental in offering ESE Lightning Protection System to our valued clients. Offered range is designed and developed in accordance with the clients needs and demands. Our team of experienced quality controllers evaluate the entire range as per industry laid parameters to gauge their safe dispatch and error free nature at the patrons end.
Some features are:
Active ESE early streamer emission air terminal SABO LIVA LAP AX-210 in accordance with latest NFC 17-102 2011 standard.
Shaft GI/FRP/SS for raising air terminal minimum 3 m above the top of the structure to be protected
Down conductor > 30*2 mm copper strip
Lightning counter of 6 digits IP65
Test clamp for disconnecting the down conductor and testing the earthing
Earthing should be maintenance free tripod type of copper bonded steel rod
Type I / Class A/ External lightning conductor
Specifications:
Very high grade stainless steel material body, 1000mm long and 5 Kg nett weight with pointed tip
Based on active early streamer emission principle and consists of ion generator
Early streamer warning time of 82 MICROSECONDS
Protection radius at 4 m height in Level IV area is 130 m
METU electrical & electronics test report as per NFC 17-102 standard
In each lightning conductor serial number, model no., CE mark, hologram & manufacturer name is available. Packed inside printed carton for each piece
Every lightning conductor carry 30 years warranty. Certificate is issued from the manufacturer
Internal last inspection report of manufacturer will be provided with every serial numbered lightning arrester, if required
Sigma test report
QA technical conformity certificate
TS EN ISO 9001:2008 certificate
BS EN ISO 14001:2004 certificate
Certificate of registration from World Intellectual Property Organization
CE certification
Testable by means of external tester LLT-X2A
Designed as per NFC17-102 standard which meets all lightning conductor standards
Suitable for all types of lightning discharges (negative, positive or lateral)
Suitable for all whether and climatic conditions and can be used in any terrain
No use of battery or power source is required
Tested for 115 KA short circuit in HV test lab, triggering time and temperature -40 to +125 degree centigrade
Applications:
1. Solar power plants
2. Industrial buildings and sheds
3. Commercial and residential buildings
4. Colleges and hospitals
5. Research laboratories
6. Telecom exchanges and Tower
7. Airports and air force stations
8. Railways
9. Golf clubs
10. Hotels
11. Shopping malls and apartments
12. Oil refineries, gas stations, oil filling stations and terminal depots
13. Shipping and Naval establishments
14. Airforce, border posts and military establishments
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Color | Silver |
Usage/Application | Industrial |
Radius | 146 M |
Length | 700 mm |
Current | 115 KA |
We bring forth a wide range of ESE Lightning Protection System for our clients. These Lightning arrester are manufactured using high grade raw material. The products offered by us are made under the strict supervision and guidance of our quality check experts. These ESE lightning conductor are mainly used in providing the information of no. of lightning strikes which our lightning protection system has safely discharged.
These products consist of the following:
Listed below are the main specifications of these products:
Additional Information:
View Complete details
Product Brochure
Material | Copper |
Shape | Round |
Conductor Type | High voltage shielded |
Product Type | High voltage shielded lightning current cable |
Length | Meter |
Lightning down conductor cable should be of 1*50 sq.mm. and tested as per NFC 17-102:2011.
View Complete details
Minimum Order Quantity: 100 Meter
Product Brochure
Material | HVSC |
Usage/Application | Lightning protection system |
Size | 1*50 sq.mm. |
Color | Black |
SABO LIVA HVSC cable is used for providing safe discharge of lightning current to ground. This High Voltage Shielded cable prevents transfer of lightning current due to EMF. Tested ij a cordance with NFC 17-102:2011 for 100KA short circuit current.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece(s)
Product Brochure
Maximum output voltage | 2000 V |
Measure range CPT | 1, 2, 3 |
Test voltage at open circuit | 1000 V/S |
Battery life cycle | 1000 |
Hole | 19 mm |
Additional Information:
View Complete details