Nishatganj, Lucknow, Uttar Pradesh
GST No. 09AAFCS3014C1ZT
Call 08048980671 69% Response Rate
We are engaged in manufacturing and supplying a wide range of Chemical Electrode Earthing for our clients. These products are manufactured using high grade raw material keeping in mind the needs and demands of our clients. The products offered by us are available at the most rates to our clients. These products are manufactured under the guidance of our professionals. The product that we offer in this category is Earthing Electrode. These products are widely appreciated and are in huge demand across the globe for their efficiency and durability.
Earthing is the grounding or fastening electrical installations to earth. In electricity supply systems, an earthing system defines the electrical potential of the conductors relative to that of the Earth's conductive surface.
If proper earthing of any electrical equipment is not available then it may result to failure of the equipment as well as causes danger to human life in case got in contact during flow of fault currents. Maximum short circuit current that is possible in any electrical circuit depends upon the transformer capacity and type of load which may come in thousands of amperes. Short circuit capacity of 1000KVA transformer is 20922A or 21KA. However, few ampere current is sufficient for loss of human life. Hence, good and permanent efficient earthing is required for safe discharge of fault currents.
Installation and maintenance of an effective low resistance earthing system is essential due to the following:
1. Efficiently dissipate heavy fault currents and electrical surges, both in magnitude and duration, to protect equipment being damaged so as to minimize down time, service interruption and replacement cost.
2. Provide a stable reference for electrical and RF circuits at the installation to minimize noise during normal operation.
3. Protection of personnel who work within the area from dangerous electric shock caused due to “step potential” or “touch potential”.
Following types of SABO chemical earthing electrodes are being manufactured and offered by us:
1. COPPER BONDED EARTH ELECTRODES
2. COPPER BONDED GROUND RODS
3. GI CHEMICAL EARTHING ELECTRODE
4. GI GROUND RODS
5. PURE COPPER EARTH ELECTRODES
Product Brochure
Equipment Type | Earthing Electrode Pipe |
Material | Copper |
Rod Diameter | 50 mm |
Connector Size | 80 mm |
Finish | Galvanised |
Usage/Application | Industrial |
Specification:
Features:
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Material | Iron |
Finish | Galvanised |
Size Of Conductor | 30 x 6 mm |
Diameter | 50 mm |
Application | Industrial,Commercial,Domestic etc |
Frequency | 50 Hz |
Additional Information:
View Complete details
Product Brochure
Length of Rod | 3m |
Equipment Type | Earthing Electrode Pipe |
Usage/Application | Industrial |
Diameter | 50mm |
Material | Galvanized Iron (GI), Zinc |
Condition | New |
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Material | Copper |
Diameter | 50 mm |
Length of Rod | 80 mm |
Usage/Application | Industrial |
Country of Origin | Made in India |
It is tested for environmental friendly use in RDSO approved. SABO SYSTEMS Pvt. Ltd. is a solution provider involved in engineering, manufacturing and implementing of leading-edge technology in the field of Earthing, Lightning Protection, Exothermic Welding, Surge Protection, and Building Intelligence System for all business verticals of the industry in India. SABO maintenance free earth electrodes are manufactured considering its suitable for all types of soil, terrain, climatic conditions, etc. These comes in GI / Copper / Copper bonded rods of various dimensions and sizes. We also manufacture Pipe in Pipe technology, Pipe in strip technology, Dual Pipe and Strip technology, copper bonded steel pipe electrode, copper bonded steel rods and copper electrodes. Together with SABO-EREC our maintenance free earth electrodes provides very low resistance path for many years.We also manufacture customised earth electrodes as per customer requirements and design.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Model Name/Number | SABO-MFE-GI-803SIP |
Length of Rod | 3000 mm |
Diameter | 50 mm |
Surface Treatment | Galvanised |
Material | Galvanized Iron (GI) |
Shape | Round |
Color | Grey |
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Usage/Application | Industrial |
Diameter | 50 mm |
Packaging Type | Box |
Color | Silver |
Finishing Type | Galvanised |
Shape | Round |
Material | Metal |
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Usage/Application | Industrial |
Diameter | 50mm |
Packaging Type | Box |
Finishing Type | Galvanised |
Material | Galvanized Iron (GI) |
Length of Rod | 3m |
Additional Information:
View Complete details
Product Brochure
Length of Rod | 80 mm |
Usage/Application | Industrial |
Material | Galvanized Iron (GI) |
Color | Silver |
Diameter | 50 mm |
Our GI Earthing Electrodes is one of the most reliable and commonly used earthing solutions. The metal in GI Earthing Electrode is coated with a layer of zinc. As zinc oxidizes and reacts with gases in the atmosphere it will eventually form a protective coating of zinc carbonate that will protect both the zinc and the iron beneath it and thus gives long lasting earthing system. The company has positioned itself as a prime Manufacturer of GI (Galvanized iron) Earthing Electrode. Harnessing years of expertise and experience, we have become the first and foremost choice of everyone when it comes to the best, advanced and highly efficient electrodes. Our team of experienced professionals works hard to design these Gel Earthing electrodes using high quality raw materials, sourced from the leading vendors of the industry. High performance, long lasting life and reliability are some of the distinctive features of our gamut of electrodes. Adhering to the national and international quality norms, we have been offering GI pipe earthing electrode reckoned for providing a low-impedance ground of high soil resistivity. If using with SG Back fill Compound, these electrodes scatter the lightning energy and varied other dangerous electrical fault currents to protect the equipment. In addition to this, the best advantage of earthing Electrode in GI is its high functional ability even in rocky or sandy soil conditions. Low-impedance ground in locations of high soil resistivity. Together with SG Back fill Compound, the system dissipates lightning energy and other dangerous electrical fault currents, even in sandy or rocky soil conditions
Features
High working life
Reliability
Require minimal maintenance
Maintenance free
Longevity
Additional Information:
View Complete details
Minimum Order Quantity: 05 Piece
Product Brochure
Material | Copper Bonded |
Brand | SABO |
Usage/Application | Industrial |
Color | Red |
Surface Finishing | Galvanised |
Shape | Round |
SABO earthing electrode consists of primary earthing electrode (outer pipe) of 99.9% pure copper pipe. The hollow space of the electrode is duly filled with a highly conductive and non-corrosive compound which safeguards the electrode against any corrosion and helps in faster dissipation of the fault or leakage current flowing through the earthing electrode.
Both the ends of the earthing electrode are permanently sealed and the top portion of the copper pipe electrode is compressed under a hydraulic machine to form a lead terminal provided at the top with the 2 holes for connecting to the load/equipment. Since there is no joint on the top portion of the copper pipe earth electrode, the dissipation of the current is ensured to the maximum level and the ohmic value is maintained precisely.
Depending upon the soil conditions, back fill compounds are selected to install along with the earthing electrode. Reslow grounding minerals are selected for normal soil conditions & Carbofill grounding minerals is selected for rocky/sandy soil conditions.
Features:
Easy installation
No maintenance
Faster current dissipation
Additional Information:
View Complete details
Minimum Order Quantity: 20 Piece
Product Brochure
Length of Rod | 80-100 |
Usage/Application | Industrial |
Material | Copper |
Color | Brown |
Diameter | 8 - 10 inch |
Size of Conductor | 2 - 3 meters |
Additional Information:
View Complete details
Minimum Order Quantity: 20 Piece
Product Brochure
Usage/Application | Industrial |
Diameter | 50 mm |
Packaging Type | Box |
Color | Grey |
Finishing Type | Galvansied |
Shape | Round |
Material | Steel |
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Material | Copper |
Brand | SABO |
Shape | Round |
Is It Corrosion Resistant | Corrosion Resistant |
Rod Diameter | 100 micron |
Packaging Type | Box |
Description-
Copper Bonded Earthing Electrodes
A stroke of lightning caused the generation of fault current that is highly potential to damage the electrical gears. Sometimes, the power supply also generates the fault currents that are considered as a direct threat to constructed area having electrical facilities and people. Hence, the grounding or earthing system has become quite indispensable to scatter away the fault current that keep precious electrical and electronic equipment safe and secure.
In the domain of electrical or electronics, earthing/ grounding is a method to send the fault current to the ground using metal parts. Grounding or earthing is a conductor in an electrical wiring system that offers low impedance channel to the earth to avoid hazardous voltages.
Hence, if a fault gets connect to exposed conductive surface within an electrical device, the copper coated safe earthing electrode system keeps it safe from any kind of damage occur by the fault current. Sometimes, we are not able to understand the reasons of the fault current that increases the importance of grounding solutions for protecting valuables.
We, being one of the key Earthing Electrodes Manufacturers, has been incorporating novel designs along with cutting edge technology, we have been providing the industry with highly effective and cost efficient Copper Bonded Earth Electrodes in different sizes.
Copper bonded grounding Electrode has been considered as the most apt equipment for earthing purpose owing to excellent resistance to oxidization. The main copper coated earth electrode is saved by the copper bonding from corrosion and the crystalline mixture is filled within the electrode.
Designed on the principle of Flat-in-pipe technology, we coat copper earth electrode using 100 micron of copper. With a crystalline mixture, the annular space between the inner conductor and the external conductor is filled. After that, it is sealed cautiously from both the ends. Due to the anti corrosive and extremely conductive nature of crystalline mixture, it has been used. It also offers low impedance grounding that is necessary for protecting transmitting facilities as well as personnel from any kind of internal or external electrical inconsistencies.
Advantages-
o Upto 250 micron CU Bonded on Steel
o Life Span Due to 250 micron CU Bonded life is much more than GI & Cu Earthing Rods
o High Conductivity with High Strength
o Cost Effective as comparison to life span & CU Rods
o Highly Reliable in long Span
Features-
Continuous electroplating processing
Variable choices are manufactured as required by the customer
Values over the life of the product
Reduced installation area and time
Application-
SABO Safe Earthing Electrode Applications
Efficient Grounding Systems reduce the risk of electrical arcing and fires. SABO Safe Earthing Electrode improves reliability
for many applications, including
Lightning protection systems.
Prevention of accidents caused by static charge and stray currents.
Protection of central communications, electronics, and AC power systems.
Meeting grounding safety requirements for electrical substations.
Ground fault neutralization.
Safeguarding critical instrumentation and process control equipment.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Length of Rod | 80 mm |
Material | Copper |
Surface Finishing | COPPER |
Is It Corrosion Resistant | Corrosion Resistant |
Usage/Application | Industrial |
Shape | Round |
SABO maintenance free earth electrodes are manufactured considering its suitable for all types of soil, terrain, climatic conditions, etc. These comes in GI / Copper / Copper bonded rods of various dimensions and sizes.
We also manufacture Pipe in Pipe technology, Pipe in strip technology, Dual Pipe and Strip technology, copper bonded steel pipe electrode, copper bonded steel rods and copper electrodes.
Together with SABO-EREC our maintenance free earth electrodes provides very low resistance path for many years.
We also manufacture customised earth electrodes as per customer requirements and design.
Additional Information:
View Complete details
Product Brochure
Length Of Rod | 3M,2M |
Model Name/Number | SABO-CBE |
Usage/Application | Residential /Industrial |
Material | Galvanized Iron (GI) |
Diameter | 50mm |
Color | Copper |
View Complete details
Minimum Order Quantity: 03 Piece
Product Brochure
Length Of Rod | 1m,2m,3m As Per Requirment |
Electrode Material | Galvanized Iron |
Electrode Diameter | 25mm To 150mm |
Model Name/Number | Sabomfe |
Usage/Application | Earthing |
Material | Galvanized Iron (GI) |
Color | Silver |
Country of Origin | Made in India |
SABO chemical earthing is manufactured considering requirement of customer and individual case to case basis. Fault current needed to discharge as well as earth resistance value desired.
Additional Information:
View Complete details
Product Brochure
Length of Rod | 1m |
Brand | SABO |
Diameter | 50mm |
Material | Galvanized Iron (GI) |
Size of Conductor | 50MM DIA 1M LONG |
Application | Earthing |
We offer our clients a wide range of Earthing Electrode. These products are mainly used to improve conductivity of the earth electrode and ground contact area. We manufacture these products using high grade raw material. The Chemical earthing manufactured by us are available at the most affordable rates to our clients.
Listed below are the varied features of these products:
High conductivity
Resistivity Improver
Non-corrosive in nature
Suitable for installation in dry form or in a slurry form
Maintenance free and in its set formÂ, maintains constant earth resistance with time
Does not dissolve, decompose or leach out with time
Shall not require periodic charging treatment nor replacement and maintenance
Suitable for any kind of electrode
Does not pollute the soil or local water table and meets environmental friendly requirements for landfill
Does not cause burns, irritation to eye, skin etc
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Thicknesss | 50 microns |
Usage/Application | Industrial |
Material | Copper |
Color | Brown |
Size of Conductor | 8 - 10 inch |
Welding Current | 1000KVA |
SABOMobile Earthing Electrodeis the new generation portable earthing device, which can be used by any mobile equipment. Mobile Earthing Electrode provides a quick and efficient solution to low resistance earthing requirements of Telecommunication, electronic and electrical equipment. Mobile Earthing Electrode effectively protects sensitive equipment by safely conducting harmful VHF, harmonics, surges, spikes, unbalances and short circuit currents into ground mass. It can be installed vertically or horizontally as per site conditions and convenience. The Mobile Earthing Electrode can also be used as earth for Lightning protection. However, for ESE LPS the code stipulates three earth pits connected in star or delta, which has to be followed. Highlights Highly efficient Excellent performance Earthing is the grounding or fastening electrical installations to earth.Inelectricity supplysystems, anearthingsystem defines theelectrical potentialof the conductors relative to that of the Earth''s conductive surface.If proper earthing of any electrical equipment is not available then it may result to failure of the equipment as well as causes danger to human life in case got in contact during flow of fault currents. Maximum short circuit current that is possible in any electrical circuit depends upon the transformer capacity and type of load which may come in thousands of amperes. Short circuit capacity of 1000KVA transformer is 20922A or 21KA. However, few ampere current is sufficient for loss of human life.Hence, good and permanent efficient earthing is required for safe discharge of fault currents.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Material | Copper |
Thickness | 16-18 Gauge |
Application | Industrial |
Length of rod | 1 mtr to 3 mtr |
Equipment Type | Copper Bonded Grounding Rod |
Frequency | 50 HZ |
Feature:
SABO maintenance free earth electrodes are manufactured considering its suitable for all types of soil, terrain, climatic conditions, etc.
These comes in GI / Copper / Copper bonded rods of various dimensions and sizes.
We also manufacture Pipe in Pipe technology, Pipe in strip technology, Dual Pipe and Strip technology, copper bonded steel pipe electrode, copper bonded steel rods and copper electrodes.
Together with SABO-EREC our maintenance free earth electrodes provides very low resistance path for many years.
We also manufacture customized earth electrodes as per customer requirements and design.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Length of Rod | 1250MM |
Color | Yellow |
Diameter | 90MM,14 |
Brand | Sabo |
Material | Copper |
Rod Diameter (mm) | 14 |
Shape | Rod |
Coating Thickness | 250 |
Packaging | Cardboard Box |
Conductor Size | 14 |
Purity | 99.9 |
Weight | 8KG |
Application | Solar Water Pumps,Street Lights,Loads Upto 5kw |
SABO readymade earth kit is ideal for loads upto 5kw.
Application: 1. Homes 2. Office 3. Solar power plant upto 5kw 4. Solar water pumps 5. Solar fencing
Additional Information:
View Complete details